Dynapac DFP12D, Operating Instruction

Page: 86 / 98

3. Loosen the fastening nut (1).
4. Remove the exhaust manifold (3) with the fastening bracket
(2).
5. Disassemble the fastening nut (1) and the fastening strap (2).
6. Pull out the screen insert (3).
7. Remove deposits from the screen insert with an appropriate
wire brush.
8. Check the screen insert for damage, replace if necessary.
9. Reassemble the screen insert and the fastening strap.
10. Tighten the fastening nut for approx.one turn.
11. Slide on the exhaust manifold with fastening strap.
12. Hook the fastening strap into the bore (A).
13. Tighten the fastening nut.
Fig. 86
Fig. 87
Fig. 88
Fig. 89
Maintenance – Annually
DFP12D 86