20
CP142 M142EN1
EVERY 500 HOURS OF OPERATION (Every three months)
1
Fig. 27 Engine cover
1. Hinge
Controls and joints
– Lubrication
Grease the engine hood hinges (1) and sliding rails of
the operator’s seat. Lubricate all other joints and
controls with oil. See Lubricant Specification.
Place the machine on a level surface.
Aktivate the parking brake and shut off the
engine.
Open the engine compartment cover.
Undo the screw (1) and remove the glass bowl (2) and
the filter (3). Clean the bowl and the filter with an
appropriate non-inflammable liquid.
Collect the diesel and cleaning liquid to
environmentally correct handling.
Reassemble in reverse order.
Start the engine and check that the pre-filter does not
leak.
Make sure that ventilation (extraction) is
adequate if the engine is run indoors. Risk
of carbon monoxide poisoning.
Fuel pre-filter – Cleaning
Fig. 26 Engine
1. Screw
2. Glass bowl
3. Filter
1
2
3
Summary of Contents for CP142
Page 2: ...19 ILF015WO1...
Page 29: ...19 ILF015WO1...
