16
CP142 M142EN1
EVERY 50 HOURS OF OPERATION (Weekly)
Tire pressure – Check
Fig. 16 Wheel
1. Filling nipples
Check the tires with a pressure gauge.
Check tire and No. of Ply, use the GROUND CON-
TACT PRESSURES table in the Operation Manual to
find correct pressure as the actual ballast and roller
weight is confirmed.
When changing tires it is essential that all tires have the
same rolling radius and amount of bearings.
Ballast bolts – Check
Fig. 18 Ballast boxes
1. Bolts
Check that the ballast bolts (1) are tightened (see
tightening torque under the Technical Specifications
heading).
Tightening torque of wheel nuts
– Check
Fig. 17 Wheel
1. Wheel nut
Check that all the nuts (1) are tight, 204 Nm (20,4 kpm)
tightening torque.
Check all tires and all the nuts.
(New machines or newly fitted wheels only).
1
1
1
Wear protective goggles when working
with compressed air.
Summary of Contents for CP142
Page 2: ...19 ILF015WO1...
Page 29: ...19 ILF015WO1...
