Dynapac CP142, Maintenance Manual

Page: 6 / 29

4
CP142 M142EN1
TECHNICAL SPECIFICATIONS
Weights and dimensions CP142
Service weight with ROPS and STD ballast (kg/lbs) ............. 11950/26,345
Service weight with ROPS without ballast (kg/lbs) ................. 5800/12,787
Service weight with ROPS and max. ballast (kg/lbs) ............. 14000/30,865
Length, std. equipped roller, (mm/inch) ...................................... 3580/141
Width, std. equipped roller, (mm/inch) ......................................... 1760/69
Height, std. equipped roller incl. ROPS, (mm/inch) .................... 2990/118
Height without ROPS, (mm/inch) ................................................ 2275/90
Tires (standard)
Tire dimensions ............................. 7.50 x 15 14 Ply
Tire pressure:
• Minimum ...................................... 240 kPa (2,4 kp/cm
2 ) (35 psi)
• Maximum .................................... 830 kPa (8,3 kp/cm 2 ) (120 psi)
Electrical data
Battery ........................................... 12 V, 90 Ah
Alternator ....................................... 12 V, 105 A
Fuses ............................................ See under heading “Electrical System”
Fluid volumes Litre (gal or qts)
Hydraulic reservoir ........................................ 75 l (19.8 gal)
Hydraulic system ........................................ 100 l (26.5 gal)
Lubrication oil, diesel engine ........................ 9,5 l (10 qts)
Coolant, diesel engine ................................... 20 l (5.5 gal)
Fuel tank ..................................................... 150 l (40 gal)
Water tank ................................................... 480 l (127 gal)