Dynapac CA 152, Instruction Manual

Page: 86 / 119

Maintenance, 10h
ICA152-4EN3.pdf 2012-06-12
Soften scrapers (Optional)
Fig. Scrapers
1. Scraper blade
2. Screws
1
1
2
2
Loosen the screws (2).
Then, adjust the scraper blade (1) so that it lightly
touches the drum.
Tighten the screws (2).
Air circulation - Check
Fig. Engine hood
1. Hood lock
2. Protective grille
1
2
Ensure that the engine has free circulation of cooling
air through the protective grille in the hood.
To open the engine hood, turn the locking arm (1)
upward. Raise the hood to its fully open position,
checking that the red safety catch on the left gas
spring is latched.
If the engine hood's gas-spring are out of action
and the hood is put at its upper position - block
the hood so that it cannot fall. If the engine hood's gas-spring are out of action
and the hood is put at its upper position - block
the hood so that it cannot fall.
76