Dynapac CA 152, Instruction Manual

Page: 115 / 119

Maintenance - 2000h
ICA152-4EN3.pdf 2012-06-12
Automatic Climate Control (Optional)
- Overhaul
Fig. Cab
1. Condensor element
1
Regular inspection and maintenance are necessary to
ensure satisfactory long-term operation.
Clean all dust from the condenser element (1) using
compressed air. Blow from above downwards.
The air jet can damage the element flanges if it is
too powerful. The air jet can damage the element flanges if it is
too powerful.
Wear protective goggles when working with
compressed air. Wear protective goggles when working with
compressed air.
Inspect the condenser element attachment.
Fig. Automatic climate control
1. Cooling element
2. Drain valve (x2).
1
2
Clean all dust from the cooling unit and the cooling
element (1) using compressed air.
Check the system hoses for chafing. Make sure that
drainage from the cooling unit is unobstructed so that
no condensation accumulates inside the unit.
Drain by pinching the valves (2)
105