Dynapac CA 152, Instruction Manual

Page: 85 / 119

Maintenance, 10h
ICA152-4EN3.pdf 2012-06-12
Maintenance, 10h
Park the roller on a level surface.
When checking and making adjustments, the
engine should be switched off and the
emergency/parking brake should be applied, if
not otherwise specified. Park the roller on a level surface.
When checking and making adjustments, the
engine should be switched off and the
emergency/parking brake should be applied, if
not otherwise specified.
Scrapers - Check, adjustment
Fig. Scrapers
1. Scraper beam
2. Screws
1
2
If necessary, adjust distance to the drum as follows:
the scraper is integrated with the beam.
Loosen the frame members' four screws (2).
Then, adjust the scraper beam (1) to 20 mm from the
drum.
Tighten the screws (2).
Scrapers, Pad-drum
Fig. Scrapers
1. Scraper beam
2. Screws
1
2
Loosen the frame members' four screws (2).
Then, adjust the scraper beam (1) to 25 mm between
the teeth and drum.
Tighten the screws (2).
75