Dynapac CA 152, Instruction Manual

Page: 41 / 119

Machine description
ICA152-4EN3.pdf 2012-06-12
Function descriptions
No Designation Symbol Function No Designation Symbol Function
1 Starter switch The electric circuit is broken. 1 Starter switch The electric circuit is broken.
All instruments and electric controls are supplied with
power. All instruments and electric controls are supplied with
power.
Starter motor activation. Starter motor activation.
2 Engine revs/Frequency selector
(Optional) The current rpm is shown in this position 2 Engine revs/Frequency selector
(Optional) The current rpm is shown in this position
The vibration frequency is shown in this position (Left
position has no function. The vibration frequency is shown in this position (Left
position has no function.
3 Rear working lights switch
(Optional). Turn right to switch on the working lights. 3 Rear working lights switch
(Optional). Turn right to switch on the working lights.
4 Hazard beacon, switch (Optional). Turn right to switch on the hazard beacon. 4 Hazard beacon, switch (Optional). Turn right to switch on the hazard beacon.
5 Direction indicator, switch
(Optional). Turn to the left to switch on the left direction indicators
etc.
The direction indicators are off in the middle position. 5 Direction indicator, switch
(Optional). Turn to the left to switch on the left direction indicators
etc.
The direction indicators are off in the middle position.
6 Hazard flashers, switch (Optional). Turn to the right to switch on the hazard flashers. 6 Hazard flashers, switch (Optional). Turn to the right to switch on the hazard flashers.
7 Main/dipped beam, switch with
control lamp (Optional). In the right position, the switch lights and the main beam
is on.
In the left position, the dipped beam is on. 7 Main/dipped beam, switch with
control lamp (Optional). In the right position, the switch lights and the main beam
is on.
In the left position, the dipped beam is on.
8 Driving lighting, switch (Optional). Lights off. 8 Driving lighting, switch (Optional). Lights off.
Parking lights on. Parking lights on.
Front working lights on. Front working lights on.
9 Warning lamp, malfunctioning
anti-spin function (Optional) The hydraulic propulsion system is not working
satisfactorily if the lamp flashes. Locate and remedy the
fault. 9 Warning lamp, malfunctioning
anti-spin function (Optional) The hydraulic propulsion system is not working
satisfactorily if the lamp flashes. Locate and remedy the
fault.
10 Voltmeter (Optional). Shows electrical system voltage.
Normal range is 12-15 volts. 10 Voltmeter (Optional). Shows electrical system voltage.
Normal range is 12-15 volts.
11 Temperature gauge, hydraulic fluid
(Optional). Shows hydraulic fluid temperature.
Normal temperature range is 65°-80°C (149°-176°F).
Stop the engine if the gauge shows a temperature of
more than 85°C (185°F). Locate the fault. 11 Temperature gauge, hydraulic fluid
(Optional). Shows hydraulic fluid temperature.
Normal temperature range is 65°-80°C (149°-176°F).
Stop the engine if the gauge shows a temperature of
more than 85°C (185°F). Locate the fault.
12 Temperature gauge, water
(Optional). Shows the water temperature.
Normal temperature is around 90°C (194°F).
Stop the engine if the gauge shows a temperature of
more than 103°C (217°F). Locate the fault. 12 Temperature gauge, water
(Optional). Shows the water temperature.
Normal temperature is around 90°C (194°F).
Stop the engine if the gauge shows a temperature of
more than 103°C (217°F). Locate the fault.
13 Engine revs/Frequency meter
(Optional). The inner scale indicates the current engine speed.
The outer scale shows the vibration frequency. 13 Engine revs/Frequency meter
(Optional). The inner scale indicates the current engine speed.
The outer scale shows the vibration frequency.
14 Compaction meter (Optional) See separate instructions 14 Compaction meter (Optional) See separate instructions
31