Dynamix DW-Phone/H, User Manual

Page: 33 / 58

18. [bureau] command
Type bureau can display commands below.
1. -print : display bureau line information and configuration.
2. -hold : set hold tone generation on or off. If other terminals support H.450 hold
function, and execute hold function when connecting with IP PHONE , user will hear
hold tone from IP PHONE . (0 for off,1 for on)
19.[rom] command
1. -print : show versions of all rom files.
2. -app , -boot , -dsptest , -dspcore , -dspapp , -rbpcm and -htpcm : upgrade main boot
code, main application code, DSP testing code, DSP kernel code, DSP application
code, Ring Back Tone PCM file and Hold Tone .
3. -boot2m :to upgrade 2mb rom file, which includes all firmware file mentioned in item 2.
Note:
1. After 2mb file download is finished, all configurations might change to default
value, user has to configure again.
2. MAC address might change to default value also, please MUST use command
setmac :
Usage: key in command setmac
key in MAC address with format: 0001a800xxxx
4. -s : it is necessary to prepare TFTP/FTP server IP address for upgrading firmware rom
file.
5. -f : the file name prepared for upgrading is necessary as well.
6. –server : specify TFTP/FTP server IP address. It is corresponding to LCD
configuration -firmware upgrade-Set file Server IP.
7. –method : specify download method to be TFTP or FTP(0 for TFTP.1 for FTP)
8. –ftp : specify user name and password for FTP download method
For example: User prepares to upgrade the latest app rom file – wtlp.103c, the TFTP
32