(7) Line Number 7
(8) Line Number 8
(9) Line Number 9
(10) Line Number 10
Note: User can set six zero “000000” on LCD to disable this number and the
number after this one. Ex. Line Number 1-5 are configured, if user set Line 3
as “000000”, Line number 3-5 will be disabled.
3. Ring Configuration
(1) Ring Style Selection
There are three tone styles for IP PHONE . Move the “~” symbol by press
or
on the keypad to select the tone style preferred, then press OK to confirm it.
Choose Tone Style:
Low Middle High
(2) Ring Volume Control
User can adjust ring volume by by press
or
on the keypad to decrease or
increase volume.
4. Indicate Forward Type
There are two selections to activate or deactivate forward function. After selection
please press
OK
(1).Activate :
choose under which situation to forward call to another endpoint.
After selection please press
OK
, then enter LINE NUMBER of another
endpoint prepared to forward to.
1. Busy
When IP PHONE is in busy status, the incoming call will be directly
forwarded to the assigned phone number.
2. No
response
When IP PHONE is continuing ringing around 10 seconds, the incoming call
will be directly forwarded to the assigned phone number.
3. Unconditional
It is included the above two types. Whether the IP PHONE is in which status, it
will be automatically forwarded to the assigned phone number.
15
