Chapter 3 Advanced Configurations via Telnet
After initializing the IP PHONE IP Address setting (please refer to LCD Configuration:
1.Connect Configuration), user can enter into configuration mode via telnet. There are 18
commands listed below.
Note:
1.After user enter IP PHONE configuration via telnet, please use login : ”root”,
password : ”press enter” to enter command line.
2.Each command user must key-in with lower case, but contents of configurations
such as h.323 alias or user name etc, user can set as capital case.
3.User who changes any configuration needs to do the
commit
command then
reboot
command.
1. [help] command
Type
help
or
man
or
?
to display all the command lists. The following figure is shown all
commands of IP PHONE .
17
