PHONE will update DDNS data immediately. (
ddns –force “IP address of IP
PHONE”
)
Note:
1. For now we only support DDNS server as www.dyndns.org and www.3322.org.
2. User must register to DDNS server first, and specify user name and password in
ddns
-id
and
ddns –passwd
.
3. The default IP address of DDNS login server is member.dyndns.org and
members.3322.org.
4. User has to specify domain name applied for IP PHONE in
ddns –hostname
.
5. The default IP address of check IP server in is checkip.dyndns.org.
11.[pppoe] command
Note:
Firmware of IP PHONE are separate into normal version and PPPoE version.
1. In Normal version has no TOS command.
1. -print: display system overall information and configuration. IF IP PHONE has already
connected to PPPoE server, user can see IP address and related information with this
command.
2. -dev: to enable or disable PPPoE function.(
pppoe –dev 0/1
)
3. –open: to open PPPoE connection(If IP PHONE is not in PPPoE connection, user can
try to connect with
pppoe -open
)
4. –close: to close PPPoE connection(If IP PHONE is in PPPoE connection, user can
disconnect with
pppoe -close
)
5. –id: to set PPPoE connection user name
6. –pwd: to set PPPoE connection password
7. –reboot: If user enable this function, after PPPoE being disconnected, IP PHONE will
automatically reboot to re-connect, and after reboot, if IP PHONE still can’t get contact
with server, IP PHONE will keep trying to connect. After re-connected, IP PHONE will
also restart system.On the other hand, if user disable this function, IP PHONE won’t
reboot and keep trying to connect.(
pppoe –reboot 0/1
)
23
