1 RJ11connector
RJ11 connector is for connecting IP PHONE with PSTN.
RJ11connector
Chapter 2 Operating Procedure – LCD Display
Configuration
1.Initialize IP PHONE
1. When power on the IP PHONE, the LCD screen shows as below.
IP-Phone
Board Start Booting
2. Wait around one minute until the IP PHONE finishes boot program initialization.
3. User can see flashing greeting as below:
System Initializing…………..
4. Then IP PHONE get into standby mode:
IP-Phone
GK
10:10:10 AM
The main LCD screen would be shown as similar as above. The GK word means the IP
9
