17
Figure 11b
*For model DYN-6336-03, you may need to remove the protection grid on the rear
wall panel to screw down the bench.
F. Installing the FRONT GLASS DOOR HANDLE
1. Now that the FRONT WALL PANEL has already been installed, the inner
and outer door handles need to be mounted to the FRONT GLASS
DOOR. According to Figure 12 - Figure 14, the FRONT GLASS DOOR
must sit between the (2) white washers. The screws are inserted from the
inside of the FRONT GLASS DOOR and screwed into the outer handle.
BE SURE NOT TO OVER TIGHTEN THE SCREWS OR YOU WILL
SHATTER THE FRONT GLASS DOOR.
Next, the inner door handle
needs to be inserted over the screws. Used the provided Hex Wrench to
tighten the (4) hex screws. (see Figure 12)
Figure 13
Figure 14
Figure 12