About this Manual
This manual can help you understand and install the Dynamic Controls DX System.
It describes the general principle, but it gives no guidelines for specific applications. If there is a
specific requirement for your application, please contact Dynamic Controls or one of the sales
and service agents, to assist you.
This manual must be read together with all other relevant DX Module or DX component
manuals, as well as all applicable Dynamic TSBs, application notes and service instructions.
In this manual there are a few symbols that will help you quickly identify the purpose of the
paragraph that follows:
Notes & Precautions:
Notes provide supporting information for the previous paragraph or section
that
should
be followed in order to install, configure, and use the product
safely and efficiently.
Warnings:
Warnings provide important information for the previous paragraph or
section that
must
be followed in order to install, configure, and use the
product safely and efficiently.
The term
‘programming’
used in this manual refers to adjusting parameters and configuring
options to suit an application. ‘Programming’ does not change or alter any software within the
controller and is performed using a controlled programming tool available only to authorised
personnel.
The term
‘accessory’
used in this manual refers to equipment that is ancillary to the main
functioning of the DX system. It does not refer to an accessory of the powerchair. The
DX System is a component of the powerchair.
DX is not user serviceable. Specialised tools are necessary for the repair of any component.
Do not install, maintain or operate this equipment without reading, understanding and
following this manual – including the Safety and Misuse Warnings – otherwise injury or damage
may result. This manual contains integration, set-up, operating environment, test and
maintenance information needed in order to ensure reliable and safe use of the DX System.
Due to continuous product improvement Dynamic reserves the right to update this manual. This
manual supersedes all previous issues, which must no longer be used.
Dynamic reserves the right to change the product without notification.
Any attempt to gain access to or in any way abuse the electronic components and
associated assemblies that make up the powerchair system renders the manufacturer’s
warranty void and the manufacturer free from liability.
Dynamic, the Dynamic logo and the DX logo are trademarks of Dynamic Controls. All other
brand and product names, fonts, and company names and logos are trademarks or registered
trademarks of their respective companies.
Dynamic owns and will retain all trademark rights and Dynamic or its licensors own and will
retain all copyright, trade secret and other proprietary rights, in and to the documentation.
All materials contained within this manual, in hard-copy or electronic format, are protected by
copyright laws and other intellectual property laws.
© Copyright 2007 Dynamic Controls. All rights reserved
