6. Installing the BENCHES
A.
This model sauna is designed to be used with or without the benches,
depending on your application. If you are using the sauna for yoga, you will want
to remove the benches. The 3-person model comes with 3 removable benches
and the 6-person model comes with 4 removable benches. Use the provided
screws for assembling the bench panels. See Figure 15 for the order of
assembly of the bench panels. Figure 16 and 16a shows the bench layout within
the sauna.
You will need to plug in the floor heater(s) before placing the
benches inside the sauna.
DYN-5830-01 DYN-5860-01
Figure 15 Figure 16 Figure 16a
7. Installing the FRONT SIDE STATIONARY GLASS with GLASS DOOR
A. Two adults will be needed mostly to assemble, but three adults will be
needed to install the FRONT SIDE STATIONARY GLASS with GLASS
DOOR.
Be very careful when lifting the FRONT SIDE STATIONARY GLASS
with GLASS DOOR onto the FLOOR PANEL. You will see the cutout which
the STATIONARY GLASS will fit into along the bottom half of the LEFT
SIDE PANEL and the FLOOR PANEL. Use a piece of cardboard and slide
it between the GLASS DOOR and the FLOOR PANEL to keep the DOOR
GLASS balanced. Once in place, one adult will need to hold the FRONT
SIDE STATIONARY GLASS with GLASS DOOR in place while a second
adult uses the provided screws to mount the FRONT SIDE STATIONARY
GLASS to the LEFT SIDE STATIONARY GLASS. Be careful to make sure
the screws are tight, but do not overtighten. (see Figure 18)
Page 16
