Heat Emitters Heater Emitters
Figure 8
Assembly Instructions
1. Choose a good location to assembly the sauna
a.
The location must be dry, level, and away from any source of water.
b.
The dedicated outlet must be easily accessible.
c.
Please note that model DYN-5860-01 will need two separated dedicated
120V 20AMP circuits.
d.
Two adults will be needed mostly to assemble, but three adults will be
needed to install the FRONT SIDE STATIONARY GLASS with GLASS
DOOR.
e.
Wood Cabin Assembly: Floor Panel Front Right Panel Right Side Panel
Rear Panel Left Side Panel Left Side
Stationary Glass Front Side Stationary
Glass with Glass Door Roof Panel Roof Cover
The sauna can be assembled in different sequences, but the above is
recommended.
e.
Tools Required: Philips screwdriver and ladder
2. Installing the FLOOR PANEL
A.
Place the FLOOR PANEL onto your floor where the sauna is to be
assembled. See Figure 9 for model DYN-5830-01 and Figure 9a for model
DYN-5860-01.
Page 13
