15
LANTERN BATTERIES SAFETY INFORMATION:
Batteries may leak fluids that can cause chemical burn, injury or ruin your product.
To avoid battery leakage:
• Install batteries correctly, observing the polarity (+/-) signs to avoid leakage.
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon-zinc) or
rechargeable (NiMH).
• Remove the batteries from the battery compartment when the unit will not be
used for an extended period of time.
• Always remove exhausted batteries from the battery compartment.
• Do not dispose of batteries in fire.
• Do not short circuit the supply terminals.
• Replace the batteries when the horn sounds become distorted.
• Non-rechargeable batteries should not be recharged.
• Use only batteries of the same or equivalent type as recommended.
• If rechargeable batteries are used, they should only be charged by adult.
• Remove rechargeable batteries from the product before charging.
• Battery chargers used with toys must be examined regularly for damage to the
cord, plug, enclosure and other parts. In the event that such damage is found,
the toy must not be used with the battery charger until the damage has been
repaired.
13. LANTERN BATTERIES
INSTALLATION
NOTE:
Batteries are not included.
• Unscrew the two 3x10 round head screws
at the bottom of the lantern socket.
• Remove the lantern wick and insert 2x1.5V
size AAA or LR03 batteries.
• Replace the socket and tighten the screws
to secure in place.
DC 1
.5V (
SIZE:A
AA)
DC 1
.5V (
SIZE:A
AA)
Lantern Socket
3X10 Round
Head Screw
