14
11. FRONT LANTERN ASSEMBLY
• Align the lantern holder with the mounting
hole on the front of the carriage body, and
tighten it with a 4x16 round head screw.
• Repeat the steps for the other front lantern.
12. REAR LANTERN ASSEMBLY
• Find the small lantern bracket and slide it into
the lantern (separate Left and Right). Align
the bracket with the mounting hole in the rear
of carriage body.
• Secure the lantern with a 4x16 round head
screw.
• Repeat the steps for the other rear lantern.
4x16 round
Ribbon
Head Screw
4x16 Round
Head Screw
• Repeat the previous steps to mount the right side curtain. Find the curtain
supports and center the right side curtain over the curtain support
31
(making
sure the small columns accommodate the curtain), then mount the curtain with
curtain supports
32
and
30
onto the right side of the carriage roof. Secure with
three 4x12 round head screws.
G
H
I
31
32
30
NOTE:
Make sure the left and right ribbons on the curtain remain outside so you can tie the
curtain.
WARNING:
Make sure to tie the curtains back before riding the carriage. Do not
ride in the carriage without tying the curtains back, as doing so would reduce visibility and
increase the risk of a crash or fall.
