LED TEST
This menu item allows a test of all call ki t station LED output contacts including call
station extension if connected to the call station kit. Activate the return_k button for
activating the LED test, all LEDs output contact are toggling on and off. Activating the
r e t u r n _ k i n p u t again deactivates the LED output contact test and returns to
the user menu.
PASSWORD
HINT: The default password for enabling the menu items
Setup Menu
and
Buzzer
is: 2222
Activating the return_k input opens the
Password
dialog box where the user can
enter a password by activating the K e y _ 1 t o 1 0 inputs. (as explained at
“date/time” settings. Activate the return_k input to commit the password.
SETUP MENU
Activating the return_k input opens the Setup sub menu, see following section.
If this menu item is not available, then it has to be activated via the
Password
dialog
box.
3.5
Setup menu
FIRMWARE VERSION
This menu item shows version of the firmware that is actually installed in the
call station kit.
CAN BUS:
The CAN bus address and the CAN BUS speed are set by hardware switches.
(see chapter 2.4):
CAN TERMINATION:
The CAN bus termination is set by a hardware switch. (see chapter 2.4):
