To switch the system off, you have to a c t i v a t e t h e d o w n _ k for
approximately 3 second. This is to prevent inadvertently turning off the
system.
Activating an ALARM input or igniting an alarm sequence at external
terminals automatically switches the PROMATRIX 8000 system’s power
on and boots the system.
SPECIAL FUNCTIONS
Generally, assigning a function to each input contact is possible. This
allows utilizing a call station kit to control the lighting, door openers,
blinds, etc.;
Even controlling volume settings is possible with the use of the up_k or
down_k contacts.
When shipped, there are no special functions assigned. Please refer to
the IRIS-Net documentation for more details.
3.3
Call station Kit Setup mode configuration
Configuring call station kit is preferably performed on the central unit via
computer and using the IRIS-Net software. This represents the most
convenient way without any limitation, while a call station kit itself offers
only limited programming ability. For configuring the call station kit via the
LC-display the call station kit has to be switched to setup mode as described
in following section.
USING THE SETUP MODE
In setup mode the configuration of the call station kit itself and parts of the
PROMATRIX 8000 system can be edited via the LC-display. Please note that
several activation contact has different functionality between setup mode
and operation mode. If needed, alternative functions should be marked for the
end users.
1. Activating first the u p _ k i n p u t and then the d o w n _ k input
simultaneously engages a call station kit setup mode.
The first menu item is indicated in the LC-display.
2. Use the call station kit key inputs for menu navigation and editing
parameters.
See following pages for a detailed description of the call station kit menu.
3. Activation from the ESC_k input by a several times returns to operation mode.
