Dynacord DPS260, Owner'S Manual

Page: 8 / 56

Introduction
Thank you for purchasing the Dynacord
DSP 260 Digital Signal Processor.
The Dynacord DSP 260 Digital System
Processor is a universal two-input, six-output
digital signal processor with the flexibility of
configuration to handle a multitude of audio
system needs and applications; installed sound,
house of worship, convention & meeting facilities,
concert touring, club, portable sound
reinforcement and more.
IMPORTANT NOTE
To achieve optimum perfor-
mance and guard against
damage to the processor,
your sound system or your-
self, please read, understand
and follow all of the direc-
tions contained in this
Owner’s Manual. Failure to
do so may result in improper
performance, loss or injury.
Dynacord DSP-260
Program:U01
(FullEdit (2in. 6out))
Edit
Setup
<
Store
>
Recall
HPF
X-Over
PEQ
PEQ
GEQ
Delay
Delay
Level
Mute Mute Mute Mute Mute Mute
DSP 260 Features
The internal routing matrix can be configured as 2-way full-range, 3-way
stereo, 4-way mono + full-range, 5-way mono + full range, 3-way stereo with a
mono sub + full-range, 4-way stereo with mono sub and low frequency and finally
as a freely assignable 2 x 6 matrix router.
The DSP 260 replaces entire racks of signal processors previously needed to
properly configure and control sound reinforcement systems with a single
Analog Devices® SHARC™ DSP processor. The substantial advantages of the
DSP 260 over discrete signal processing racks include:
• 24-bit, 48kHz digital signal path
• No patch cables to fail or add noise
• Optimal gain structure throughout all stages of signal processing;
no gain matching from processor to processor.
• Recallable factory and user presets; instant system reconfiguration
for differing applications and performances.
• Easy, intuitive operation and editing with a PC and the DSP 260
Graphic User Interface Application.
Each DSP 260 Digital System Processor includes the following
signal processing blocks:
• Input VU Metering
• Analog or AES/EBU inputs
• 24-bit, 48kHz A/D converters
• Stereo Hi-pass filters
• Stereo 9-band parametric equalizer
• Stereo 31-band graphic equalizer (available as a software add-on
with V1.1 firmware - see www.dynacord.com for details)
• Stereo delay
8