Dynacord DPS260, Owner'S Manual

Page: 27 / 56

For detailed
EQ plot im-
ages please
see page 45
Hi-pass
The Hi-Pass filter determines the ultimate low
frequency that your sound reinforcement
system is allowed to reproduce; given the
capabilities of amplifiers, speakers and
transducers. Keep in mind that the DSP 260 signal path already includes
a hi-pass filter prior to the Input PEQ DSP block. Settings to this filter in
most configurations may be redundant or interactive with the initial Hi-
Pass filter.
Available parameters are Frequency and Slope. The frequency
parameter determines the frequency below which frequencies will be
attenuated. The slope determines how quickly frequencies below that
will be attenuated. (See response curve.)
Use the < Select > buttons to navigate to the filter setting you wish to
adjust, and the Value Up and Down buttons to alter these settings.
Press the Value Up and Down buttons once to increment values by one
unit, or press and hold to scroll rapidly through available values. (Values
do not wrap-around.)
Input A/B Parametric EQ
Band Type Frequency Slope Resp / Q Gain
HIPASS HIPASS
20Hz - 20000Hz
PARA EQ BAND 1-9 LOSLV
20Hz - 20000Hz
HISLV 20Hz - 20000Hz
6dB/oct.
12dB/oct. 0.40 to 2.00
6dB/oct.
12dB/oct.
6dB/oct.
12dB/oct.
-15.0dB to +15.0dB
-15.0dB to +15.0dB
PEQ
20Hz - 20000Hz 0.40 to 20 -15.0dB to +15.0dB
LOPASS
20Hz - 20000Hz
HIPASS
20Hz - 20000Hz
6dB/oct.
12dB/oct. 0.40 to 2.00
6dB/oct.
12dB/oct. 0.40 to 2.00
27
Owners Manual