Dynacord CMS 1000-3, Owner'S Manual, Page: 24 / 92

CMS
3
24
HINT: The REC PEAK warning appears also when the DIGITAL AUDIO INTERFACE connected to a PC/Mac is used
for playback purposes only. In this case the warning can be ignored.
ACTIVE
The LIMIT indicator signals that the USB connection between CMS and PC/Mac is active and the DIGITAL AUDIO INTER-
FACE is ready for operation.
2.8 Rear panel
73 - M
AINS
C
ONNECTOR
The CMS receives its power supply via the lockable Mains input. Only the provided power cord may be used. Connect
the CMS only to a mains network, which corresponds to the requirements indicated on the type plate.
HINT: Press the yellow button at the plug to disconnect the power cord.
74 - POWER
Mains switch to turn the CMS on or off. The CMS is operational when the display indicates the selected program num-
bers. Please make sure to set the master faders to their minimum position or engage the STANDBY switch before switch-
ing the power on. This will save you, your audience, and the equipment from unnecessary stress. In case additional
external equipment is connected to the CMS – e.g. power amps, FX units, EQs, etc. – please, proceed in the following
order when switching your equipment on:
1.
switch on the FX units
2. switch on the CMS
3. switch on external power amps
When switching the power off, please proceed in the opposite order.
75 - MIDI IN/OUT
The MIDI IN/OUT ports allow connecting MIDI devices to the CMS. Next to the PC MIDI interface controlling the effect
unit is possible via MIDI IN, please see page 27 for details.