Installation Guide
39
Follow the steps below to mount the Dome Camera with the Compact
Pendent Mount.
1)
Make a cable entry hole on the wall to recess the cables. Otherwise, users
could push up the Cable Entry Board on the Compact Pendent Mount’s
Mounting Plate to place the cables, as shown in the photo below.
2)
Fix the Compact Pendent Mount on the wall with proper screws and screw
anchors.
3)
Attach the Waterproof Rubber to the Compact Pendent Mount.
4)
Run the cable(s) through the Compact Pendent Mount with the Data
Cable’s 22-pin cable coming out of the outlet.
NOTE:
Please block the cable entry hole with the supplied sponge
to avoid insects entering the Pendent Mount. The sponge can be
placed in two ways as shown in the illustrations below.
5)
Thread the cable(s) through the Indoor Mount Kit and join the Indoor
Mount Kit to the Compact Pendent Mount with the supplied screws and
washers. Then adjust the Waterproof Rubber to the joint.
6)
Connect the cable(s) to the Dome Camera.
7)
Join the Dome Camera to the Indoor Mount Kit with the supplied screw
and washers.
Cable Entry Board
Mounting Plate
Sponge
Sponge
