Installation
Guide
14
3.2
Cables and Connections
The Dome Camera is supplied with one integrated 22-pin Data Cable for
connecting with the power, video, and RS-485/audio input & audio output
cables. Please read the following sections thoroughly before making
connections.
3.2.1 Cable
Requirements
For operation, the Integrated High Speed Dome Cameras require video,
RS-485 and power cables as described below:
•
The video cable sends video signals to a remote viewing site. Using a
coaxial cable to send video signals is recommended.
•
RS-485 cable carries commands from a control device to the Dome
Cameras. A CAT 5, 24 gauge cable is recommended.
•
Power supply: DC 12V/AC 24V output voltage
NOTE:
Ensure power supply meets the Dome Camera’s power
requirement, or product impairment will occur. If any mistake happens,
please contact with a qualified maintenance engineer.
3.2.2
22-Pin Data Cable
The analog and network Speed Dome Cameras’ Data Cables are illustrated
as follows.
Analog
Model
DC 12V Data Cable
