Installation Guide
33
Figure
Top view of fixed In-Ceiling
(T-Bar) Mount.
When screwing the In-Ceiling
(T-Bar) Mount’s wing will keep
approaching to the ceiling board
until it is completely flush with
the board.
NOTE:
Please make sure
the In-Ceiling Mount’s
wings are completely flush with
the ceiling board
STEP 6
Run the Data Cable through the
center hole of the In-Ceiling
Mount. Then Connect the cable
to the mating 22-pin port on the
Dome Camera’s base plate.
NOTE:
If using a network
Dome Camera, run the
Ethernet cable in the same way
and connect it to the camera’s
LAN port securely.
