Installation
Guide
12
3.1.3 ID
Setup
Please change the analog Dome Camera’s ID if there is more than one Dome
Camera in the same network. Use the switch to change your Speed Dome
Camera’s ID by setting the 10-bit dip switch. For instance, if the camera’s ID
is 006, set the SW 8 and SW 9 to “ON,” with the rest to “OFF,” as shown
below.
For switch configuration details, please refer to
Appendix B: Switch Settings
Index Table
in the Dome Camera’s User Manual.
NOTE:
No two Dome Cameras should be given the same ID, or
communication conflict may occur.
