Installation
Guide
28
STEP 1
Fasten the Fixing Plate on the
Dome Camera’s back plate by
first inserting the side with three
holes into its mate slot on the
camera’s back plate. Push the
plate inside the slot to the left,
aligning the three holes on the
Fixing Plate to the ones on the
back plate, and then screw the
Fixing Plate tightly using the
supplied M3 screw.
NOTE:
The orientation of
the Fixing Plate is shown
in the figure on the right side.
STEP 2
Remove the Decoration Ring
from the Hard Ceiling Mount.
STEP 3
Place the Hard Ceiling Mount to the desired position on the ceiling,
and mark the position of the three screw holes.
STEP 4
Drill these holes on the hard ceiling.
