4.2
Base
cover
Removing
the
base
cover
Remove the base cover according to the following procedures and Figure 4.2-1.
1.
Turn the laptop upside down so that the bottom is facing up.
2.
Remove the six M2x5 screws
□
,1 and four M2x5 screws
□
,2 (This four screws have angle to
fix D cover)
3.
Press the cover-edge and pry up the base cover from the inner edges, starting from the top
□
,3,
then along the sides
□
,4 and then the bottom
□
,5.
4.
Slightly shake the base cover to release the center snap on base cover
□
,6.
5.
Remove the base cover
□
,7 as shown in Figure 4.2-1.
Figure
4.2-1
Removing
the
Base
Cover
