BlueWave® QX4® User Guide
19
Set Up
On the variable mode menu (Figure 17), the user will see seven programs. Each program
is a collection of steps and cycles. The programs are stored in local memory and can be
used via the GUI interface or the PLC interface. Each LED Head can be programmed
independently of the other LED Heads.
To run or edit a program, navigate using the up and down buttons. Once highlighted,
press the Right button to enter.
Figure 17. Variable Mode Menu
Figure 18. Program Menu
The program menu (Figure 18 ) allows the user to see the number of steps and cycles
active for each one of the LED Heads in the given program. To edit the configuration of
an LED Head, navigate using the up and down buttons, then press the right button to
edit. Any LED Head that is not connected will be grayed out on the display. The user can
still select and program any grayed out rows, but the unit will not run the program for
the disconnected LED Head.
On the edit menu (Figure 19), the user will see the number of steps and cycles currently
configured for a head. A step consists of a power configuration for a given amount of
time. The collection of steps will repeat for the number of cycles. The user can adjust
the number of cycles from 0-99. Setting the number of cycles to 0 will disable the
highlighted head.
To edit the steps, navigate using the up and down buttons, then press Right button to
edit.
