BlueWave® QX4® User Guide
13
Unpacking
Upon arrival, inspect all boxes for damage and notify the shipper of box damage
immediately. Open each box and check for equipment damage. If parts are damaged,
notify the shipper and submit a claim for the damaged parts. Contact Dymax so that
new parts can be shipped to you immediately.
Check that the parts included in your order match those listed below. If parts are
missing, contact your local Dymax representative or Dymax Customer Support to resolve
the problem.
Parts Included
Controller
■
Controller Base
■
Power Adapter
■
Power Cord
■
Foot Switch
■
Safety Glasses
■
BlueWave QX4 User Guide
LED Heads
■
LED Head Assembly
■
Accessory Focusing Lenses
■
Extra connection cable extensions
can be ordered as accessories
System Setup
System Connections
Power Cable Connection
—
Attach the Power Cord to the Power Cord Receptacle
located on the
unit’s
back panel (Figure 4). Press the Power Cord firmly into the
receptacle until it clicks and locks into place. The unit is now powered and ready to be
turned on with the On/Off Switch.
To remove the Power Cord, pull the retaining body of the Connector to unlock it from
the receptacle.
LED Head Connection Jacks
—
Along the top of the
Controller’s Rear Panel,
there
are four LED Head Connection Jacks labeled CH 1 - 4. Press the LED Head Connector into
any available jack until it clicks and locks in place.
