U S E R G U I D E
|
B L U E W A V E
®
Q X 4 V 2 . 0
21
Irradiation
Once all the LED heads have been configured, press the
run button to start irradiation of all LED heads, or press
the right icon of each channel to ON/OFF separately.
The BlueWave QX4 V2.0 is rated for continuous
operation. However, if the internal temperature of the
system exceeds the maximum safe operating
temperature limits, each LED head contains a thermal
sensor that will shut the unit down to protect the
components of the head.
During irradiation, the timer counts down to indicate the
working time on the current curing session. Press the
run button during an irradiation cycle to stop the
irradiation and reset the cycle. The footswitch can also
be used instead of pressing the run button.
Figure 14.
Screen During Irradiation
PRODUCTION Mode
Set Up
Enter the PRODUCTION mode by pressing the
ADMIN icon in ADMIN mode.
In PRODUCTION mode, all parameters are taken
from the ADMIN mode, and no parameters are
allowed to be modified.
You need to enter the password to return to the
ADMIN mode from PRODUCTION mode.
Figure 15.
PRODUCTION Mode
Screen
