5
W W W . D Y E P A I N T B A L L . C O M
PERFORMANCE SETTINGS
DWELL
Values 12 - 20 (Factory Default 16)
Dwell is the amount of time, in milliseconds, that the solenoid is
activated for each shot. Setting the dwell too high will decrease max
rate of fire, setting the Dwell to low will not be sufficient to ensure the
optimal velocity.
16.0
GAME CLOCK
Set countdown game timer. (Default 2:30) To operate game timer in
play mode press the joystick right to start and stop the game timer,
Press and hold the joystick right for 2 seconds to reset.
TRIGGER SENSITIVITY
Values 1 - 20 (Factory Default 3)
Trigger sensitivity is the amount of time that the trigger must be
released before the next trigger pull is allowed.
1 2 . 5
RATE OF FIRE
Values 5.0 - 18.0 (Factory Default 12.5 bps)
The ROF setting is used to set the maximum rate of fire. ROF is
adjustable by 1/10th per second.
SEMI-AUTO
OUTLAW
FIRE MODE
(Factory Default Semi-Auto)
Choose between 5 different fire modes:
Semi-Auto: One trigger pull = one shot
Millennium/ NXL Ramp: Compliant with Millennium series rules
Burst: Compliant with PSP series rules
Full Auto: Continuous fire with trigger depressed after 3rd trigger pull
Outlaw: Customize PPS, pulls to start, burst of ramp. Select Outlaw mode
and follow prompts to customize fire mode
06
ABS
Anti Bolt Stick - Values off-10(Factory Default 6)
ABS is the amount of time, in Milliseconds, that the dwell is increased
for the first shot after a period time of no shots. This is to help prevent
bolt stick, and first shot drop off.
20
ABS WAIT TIME
Values 10-90 seconds in increments of 5 sec (Factory Default 20)
ABS wait time is the time, in seconds, that must expire between shots
before the ABS activated.
EYE DELAY
Values 01-20 (Factory Default 3)
Eye Delay is the amount of time, in milliseconds, that the eyes must
read a paintball in the breach before the M3s is allowed to fire. This
helps to prevent ball chop in the breach. It is recommended to increase
the Eye Delay for slower feeding loaders.
METHOD OS AIR (MOSair)
