D9
25
4. There is a sewage level sensor in the recovery tank.
Keep the sensor clean and remove the winding on it
to ensure it can move freely.
If possible, clean as shown in the right figure
Splash proof skirt brush cleaning
Splash proof skirt brush is a protective device to prevent large sundries from entering the brush
and splashing out of the brush . It should also be maintained regularly to play its normal function.
1. If it is not greasy ground, wash the skirt brush
properly with clear water after the work every day
to keep the skirt brush clean and prevent repeated
pollution.
2. If it is greasy ground, spray the diluted degreaser
on the skirt brush every day, remove the oil stain in
time, and ensure that the skirt brush is clean.
3. The antisplash skirt brush can also be removed
from the brush plate cover for cleaning, and then
installed after completion.
Be careful:
In order to facilitate the cleaning operation, we designed the cover of the recovery
tank to be removable. When cleaning the recovery tank, we can remove the cover of
the recovery tank and reinstall it after cleaning.
When cleaning the recovery tank, never pour water into the air inlet of the motor. The
air inlet is directly connected to the suction motor. Once the water is poured in, it will
cause direct damage to the motor.
Warning:
There is a liquid level sensor in the recvoery tank. When cleaning the recovery tank, it
is necessary to pay attention to the removal of any winding and dirt, but do not use
water to directly impact or damage its duck beak structure. Once damaged, the
machine will lose the full sewage alarm function.
Be careful:
Splash apron is a consumable that can be disassembled, cleaned or replaced, and
can be purchased from a dealer or factory if necessary.
Removal method of splash apron: remove one anti-collision wheel to remove the
apron
