D9
14
The following actions should be completed
before running the machine
1. connect the battery plug
2. release the brake pedal
3. check whether the brush is in place and check whether
the suction handle is in place
4. place the speed control knob in the work area
5. insert the key and turn clockwise to the ON. Position
6.observe the power indicator and start the device when
the electricity is normal.
7.choose working mode
Brush start
（
A
）
●
start the brush button, the brush system will automatically
drop, the machine is in the state of preparation, if you do
not want to drain out water, you can press the water button.
The drain indicator light is on means drain out open, and
the drain light indicates off means the drain out water is
closed.
●
If the machine is in a stationary state, the brush system is
only in the ready state and the brush system will only enter
the working state when the machine enters the forward
state.
suction start
(B)
（
water suction indicator light is on
）
●
press the suction button, the suction system is in the working
state, squeegee fall down automatically and the water suction
motor will automatically open
●
if the surface dirt is particularly serious, you can choose to
brush function, only open the brush system, not open the
suction system, the machine can be repeated cleaning in
serious areas of dirt;
Be careful
Low foaming detergent should be used. If a high foam cleanser is
used, the foam in the recovery tank will overflow into the inlet of the
suction motor and cause the motor to burn out.
The use of pure acid or caustic soda will cause serious damage to
the machine
such operations should be placed in the work
area warning signs, told the surrounding
personnel, pay attention to wet ground anti-skid.
Connect battery
Release the brake pedal
Brush switch A
Suction switch B
Discharge water switch C