Dyaco GT90D, Owner'S Manual

Page: 7 / 44

GT 90D Treadmill
5
Cut the banding straps with a short box cutter (razor knife); separate the carton from the one under-
neath it by prying up on the staples (if applicable). Pull the carton over the treadmill parts and locate
the hardware pack. Remove only the hardware for the step you are currently assembling to avoid
confusion and mix ups.
Pull the carton over the treadmill parts and lay it on a level surface.
GT 90D Assembly Pack Checklist
# 74. 3.5 × 12m/m_
Sheet Metal Screw (4pcs)
# 80. Ø8 × 1.5T_
Split Washer (4pcs)
#99. 5/16" × 1/2"_
Hex Head Bolt (8pcs)
#100. Ø5/16" × Ø18 × 1.5T_
Flat Washer (8pcs)
#125. 5/16" × 3/4"_
Button Head Socket Bolt (8pcs)
#126. M5 × 15m/m_
Phillips Head Screw (6pcs)
# 90. 13L_Wrench (1pc) # 102. Combination M5 Allen Wrench &
Phillips Head Screw Driver (1pc)
# 103.
M6_
L Allen Wrench (1pc)