Dyaco GT90D, Owner'S Manual

Page: 14 / 44

GT 90D Treadmill
12
Quick Start Operation
1. Attach the Safety Key to enable the display (if not already on).
2. Press any button to wake display up if not already on.
3. Press Start Workout on the Homescreen to begin belt movement at 0.5 mph, then adjust
to the de- sired speed using the Speed + or - keys.
4. To slow the treadmill, press and hold the Slow - key (console or hand rail) to the desired
speed.
5. To stop the tread-belt press and release Stop button.
Functions
The touchscreen allows you to control functions by directly touching the screen, or by using
the physical buttons under the screen. The physical buttons are as follows:
•
Speed
+ or - buttons to control the speed,
•
Incline + or - buttons to control the incline of the treadmill,
•
Start button to begin
•
Stop
button to end, or pause the workout
•
Fan button to control the fan speed,
•
Program
button to select a desired workout program
Pause / Stop
1. Press
Stop
button once, the belt will slow down gradually till fully stop. After 5 minutes the
display will reset and show the workout summary on the screen.
2. Press Resume button to continue the workout from the pause.
3. Press Finish button to end workout.
Incline Features
1. The incline is changeable any time during the workout.
2. Press and hold Incline
▲ or ▼ buttons on the handrail or
Incline + or - buttons on
the screen to change the incline to the desired level.
Heart Rate Features
Pulse (heart rate) on the screen shows the current value of the heart beats per minute. You
must hold both left and right stainless steel sensors to measure the pulse. The pulse value
will be shown on the screen continuously. You may use the hand pulse sensors while in
Heart Rate Control. It will also pick up wireless heart rate transmitters that are Polar and
Bluetooth compatible.