8
DXE-IS-RCT DC Shunt Control Line Protector
DX Engineering Rotator Control Line Protector is a custom made surge protector designed for use on rotator cables - up to 8
conductors. Also ideal for control lines of remote antenna switches and any low voltage control system where voltages are normally
below 60 Vdc or ac.
DXE-IS-RCT features include:
* Weatherproof metal enclosure with cover, mounting stud and terminal gaskets to deter water from
entering the enclosure.
* Terminal strips to connect up to eight rotator control wires
* 1/4 in. x 20 mounting stud allowing multiple mounting configurations
* Each line connection has an individual shunt MOV for maximum surge protection
* Voltage spikes exceeding 82 Vdc (in either polarity) will be shunted to ground
* RoHS compliant construction
DXE-CW9S - Shielded Control Wire, 9 conductor stranded, per foot
DXE-CW9S is a high quality shielded outdoor cable. It features 9 #24 AWG stranded conductors with aluminum
foil shielding plus a #24 stranded tinned copper drain wire. This gives you 8 switch positions plus common ground -
plus the separate shield. It has a gray PVC jacket.
This cable is ideal for DX Engineering Remote Antenna Switches
and Four Square arrays, and should be considered for any low-current custom remote switching application you have
- such as receiving antenna arrays. Order by the foot in the length you require. Price shown is per foot.
A nice feature is the "rip cord", which allows for easy stripping of the heavy jacket without worry about nicking or accidentally
cutting the conductors.
DXE-CW9-1K - Shielded Control Wire, 9 conductor, 1000 ft reel
DXE-CW9 - Shielded Control Wire, 9 conductor, per foot
DXE-CW9-1K is a 1000 foot box of high quality shielded outdoor FTP (Foil Twisted Pair) Cat5e cable. It features 4
Twisted pairs of 24 AWG solid wire with Al foil shielding plus a solid tinned copper drain wire - providing a total of 9
conductors for DC switching applications. It has a polyethylene jacket and is rated for direct burial. This cable is ideal for DX
Engineering Remote Antenna Switches and Four Square arrays, and should be considered for any low-current custom remote
switching application you have - such as receiving antenna arrays. A nice feature is the "rip cord", which allows for easy
stripping of the heavy jacket without worry about nicking or accidentally cutting the conductors. Excellent for use in all
outdoor applications of switching, networking, data transfer and phone lines. As a data transfer line, it supports
10/100/1000Mbps.
DXE-PSW-12D1A - AC Adapter 12 Volt DC 1000 mA Wall Transformer
120 Vac 60 Hz input - 12 Vdc, 1 Amp, Fused output. A standard 2.1 mm plug connection for 12 Vdc.
Outer connection
is
GROUND
Center Pin
is input for
+12 VDC
.
Technical Support
If you have questions about this product, or if you experience difficulties during the installation, contact DX Engineering at (330)
572-3200. You can also e-mail us at:
For best service, please take a few minutes to review this manual before you call.
This unit is RoHS (Reduction of Hazardous Substances) compliant. The components, including the solder used are all lead free. If you decide
to do any modifications or internal repairs, you should use only lead free solder and lead free soldering tools. Lead free solder melts
approximately 100 degrees (F) higher than the old leaded solder, so you may need to upgrade your current soldering system.
Warranty
All products manufactured by DX Engineering are warranted to be free from defects in material and workmanship for a period of one (1) year from date of shipment. DX Engineering’s sole obligation
under these warranties shall be to issue credit, repair or replace any item or part thereof which is proved to be other than as warranted; no allowance shall be made for any labor charges of Buyer for
replacement of parts, adjustment or repairs, or any other work, unless such charges are authorized in advance by DX Engineering. If DX Engineering’s products are claimed to be defective in material
or workmanship, DX Engineering shall, upon prompt notice thereof, issue shipping instructions for return to DX Engineering (transportation-charges prepaid by Buyer). Every such claim for breach of
these warranties shall be deemed to be waived by Buyer unless made in writing. The above warranties shall not extend to any products or parts thereof which have been subjected to any misuse or
neglect, damaged by accident, rendered defective by reason of improper installation, damaged from severe weather including floods, or abnormal environmental conditions such as prolonged exposure
to corrosives or power surges, or by the performance of repairs or alterations outside of our plant, and shall not apply to any goods or parts thereof furnished by Buyer or acquired from others at
Buyer’s specifications. In addition, DX Engineering’s warranties do not extend to other equipment and parts manufactured by others except to the extent of the original manufacturer’s warranty to DX
Engineering. The obligations under the foregoing warranties are limited to the precise terms thereof. These warranties provide exclusive remedies, expressly in lieu of all other remedies including
claims for special or consequential damages. SELLER NEITHER MAKES NOR ASSUMES ANY OTHER WARRANTY WHATSOEVER, WHETHER EXPRESS, STATUTORY, OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS, AND NO PERSON IS AUTHORIZED TO ASSUME FOR DX ENGINEERING ANY OBLIGATION OR LIABILITY
NOT STRICTLY IN ACCORDANCE WITH THE FOREGOING.
©DX Engineering 2017
DX Engineering
®
, DXE
®
, DX Engineering, Inc.
®
, Hot Rodz
®
, Maxi-Core
®
, DX Engineering THUNDERBOLT
®
, DX Engineering Yagi Mechanical
®
, EZ-BUILD
®
, TELREX
®
, Gorilla Grip
®
Stainless
Steel Boom Clamps, Butternut
®
, SkyHawk™, SkyLark™, SecureMount™, OMNI-
TILT
™, RF-PRO-1B
®
, AFHD-4
®
are trademarks of PDS Electronics, Inc. No license to use or reproduce any of
these trademarks or other trademarks is given or implied. All other brands and product names are the trademarks of their respective owners.
Specifications subject to change without notice.
