2
Table of Contents
Introduction
2
Specifications
2
Theory of Operation
3
Installation
3
Front Panel
3
Rear Panel
4
Relay (1 of 8) and BCD Output Voltage
6
Maintenance
7
Lightning Protection
7
Technical Support
8
Warranty
8
Introduction
Congratulations on your purchase of the
CC-8A
Control Console. Its unique design features both 1-
of-8 and BCD control. This allows it to be used with existing 1-of-8 systems like the DX
Engineering
DXE-RR8-HP
remote 8 port RF switch, or BCD systems like the
DXE-RFS-2P
and
DXE-FVC-1
. Its universal nature allows operation with any 1-of-8 or BCD system of compatible
voltage. We know you are anxious to get started but before you install the
CC-8A
, take a few
minutes to read this brief user guide and familiarize yourself with the installation, operation and
safety procedures. We are confident that you will find this control console easy to use and that it
will reward you with years of faithful service.
This unit is RoHS (Reduction of Hazardous Substances) compliant. The components, including the
solder used are all lead free. If you decide to do any modifications or internal repairs, you
should use only lead free solder and lead free soldering tools. Lead free solder melts
approximately 100 degrees (F) higher than the old leaded solder, so you may need to
upgrade your current soldering system.
Specifications
Switching Positions
Eight
Power Required
+ 12 Vdc (nominal) 1 to 1.5 A
Output Control Voltage
+ 12 Vdc (nominal)
LED (Light Emitting Diode) Brightness
Fully Adjustable
DC Output Protection
Internal automatic reset fuse
Output format
Standard 1-of-8 and BCD
