- 8 -
Attaching Ground Radial Wires to the Radial Plate
Using the 20 sets of supplied 1/4" stainless steel hardware (Bolt, Flat Washer, Star Washer, Split
Washer, Nut) connect the optional ground radial wires to the
DXE-RADP-3
Radial Plate as shown
in
Figure 2
. Additional hardware kits are available (
DXE-RADP-1HWK
) that contain 20 sets of
Radial Plate Hardware.
There are optional DX Engineering Radial Wire Kits available.
DXE-RADW-500K/BD
contains a
500 foot spool of 14 gauge copper stranded wire with black PVC insulation, 20 Terminal Lugs and
100 Steel or Biodegradable Lawn Staples. The
DXE-RADW-1000K/BD
Radial Wire Kit contains
a 1,000 foot spool of 14 gauge copper stranded wire with black PVC insulation, 40 Terminal Lugs
and 200 Steel or Biodegradable Lawn Staples.
RADW-20RT, -32RT
or -
65RT
contain 20 each
radial wires with 1/4" terminal attached. These kits come in 20’, 32’, or 65’ lengths.
Depending on the number of radial wires used, space their attachment evenly around the Radial
Plate. The Radial Plate will accommodate up to 60 radial wires (60 laser drilled holes), or up to 120
radials if doubled up.
Radial Wire Pattern
Figure - 2 - Radial Wire Hardware Installation
