- 20 -
Installation of Vertical Feedline Choke Assembly to Antenna Mount
The completed
DXE-VFCC-H05-A
Vertical Feedline Current Choke and Shelf assembly are
mounted to the antenna mast pipe using the supplied
DXE-SSVC-2P
V-Camp assembly. Position
the Balun Shelf Bracket approximately 1/4" above the Radial Plate mounting flange as shown in
Figure 14
. Tighten the clamp to hold the assembly in place. When tightening, observe the split
washers. When they fully seat (flatten out), the clamp is tight enough. Any clamp should be
tightened evenly from side-to-side with an equal amount of thread above each nut.
Figure 14
