30
• ORIGIN OFFSET
OFFSET SETUP
(CTRL KEY)
PAN OFFSET : 000.0
TILT OFFSET : 000.0
ENABLE : OFF
SAVE AND EXIT(ESC TO CANCEL)
This feature helps align a new dome camera exactly the same as a previously installed camera.
Dome camera’s origin set and all data initialize option do not override offset values. Only the default set
option in this menu will set the offset value to zero. This can be used to avoid ceiling obstructions.
• FACTORY DEFAULT
Select “
FACTORY DEFAULT
” to initialize the data.
FACTORY DEFAULT
ARE YOU SURE?
CANCEL
OK
• DOME RESET
DOME RESET
ARE YOU SURE?
CANCEL
OK
This feature is used to re-calibrate the orientation of a dome camera. Origin offset values are not affected
by this function. (Offset is still valid after origin set.)
