19
3.5 Tour
There are 8 programmable Tours. Each Tour consists of up to 40 Preset positions, Patterns, Scans or other
Tours (second-level). Using second-level Tours, it can be expanded to over 300 functions in a single Tour.
TOUR SETUP
NUMBER : 01
TITLE : T01
SCAN TYPE : NORMAL
SPEED : -- STEP
TOUR FUNC
SAVE AND EXIT(ESC TO CANCEL)
TOUR FUNC SETUP
(CTRL KEY)
DWELL : -- SEC
003 A04 --- --- ---
--- --- --- --- ---
--- --- P01 --- ---
--- T02 --- --- ---
--- --- --- --- ---
--- --- --- --- ---
--- --- --- --- ---
--- --- --- --- ---
EXIT(ESC TO EXIT)
--- Blank
position
SCAN TYPE
NORMAL, VECTOR
DWELL
03 ~ 99 seconds
003
Preset (1 ~ 240)
A04
Auto Scan (1 ~ 8, 10 ~ 17)
P01
Pattern (1 ~ 8)
T02
Tour (1 ~ 8)
Follow the steps below to program the Tours:
1. Press the
MENU
key to display the main menu on the monitor. Scroll to Tour and press the
Right
key to
enter the Tour menu.
2. Select “
NUMBER
” and set the desired number by pressing the
Left
or
Right
key.
3. Choose a blank position to be programmed by pressing the
Up
,
Down
,
Right
or
Left
key.
4. To add a Preset, press the
Tele
or
Wide
key then the stored Preset number displays.
5. To place functions other than Preset, press the
IRIS Open
key to scroll for Tour, Pattern or Auto Scan
respectively.
6. You can also overwrite the programmed number and remove a stored number from the Tour, press the
IRIS Open
key until ‘---’ is displaying in the position.
7. Repeat step 2 through 6 for each desired position. Each title will be displayed on top of the line.
