17
3.4 Preset
If you need to view specific places routinely, you should program Presets. A Preset is a programmed video
scene with automatic pan, tilt, zoom, focus, and AE settings. Once programmed, placing the number
position and pressing the
PRST
key will move the camera to the set scene and adjust the camera’s settings
automatically. In addition, Presets may be assigned as a “home” position. Users can setup up to 240
individual presets.
There are eight pages of Preset menu. Each page has 30 Presets. Pages can be scrolled by pressing the
Left
or
Right
key on the first or last No. of Preset.
PRESET SETUP
NUMBER : 001
TITLE : ------
CAMERA SET
DWELL : -- SEC
1 2 3 4 5 6 7 8 9 0
- * - - - - - - - -
- - - - - - - - - -
- - - - - - - - - -
NEXT PAGE
SAVE AND EXIT(ESC TO CANCEL)
-
Blank Preset position
*
Position has the Preset
!
Current cursor position
Follow steps below to store the Preset positions:
1. Press the
MENU
key to display the main menu on the monitor. Scroll to Preset and press the
Right
key.
2. Select the blank Preset position to be stored by pressing the
Up
,
Down
,
Right
or
Left
key.
3. After selecting a blank position, press the
IRIS Open
key. Use the
Up
,
Down
,
Right
,
Left
,
Tele
or
Wide
key to control the direction of the camera and lens.
4. After aiming the camera (view direction and lens control), press the
IRIS Close
key. The cursor will be on
the “
TITLE
” after saving data then press the
Tele
or
Wide
key to edit the Preset title. Follow the
procedure of the Auto Scan above to edit titles.
5. Select “
CAMERA SET
” and press the
Left
or
Right
key. Then the Preset camera setup will be displayed.
PRESET CAMERA SETUP
FOCUS : AUTO
MOTION: OFF
MOTION SETUP
AE SETUP
SAVE AND EXIT(ESC TO CANCEL)
Set
FOCUS
AUTO, MANUAL, ONE PUSH
Set
MOTION
OFF,
ON
