25
5.2.6
802.1x
Go to Setup>Network>802.1X interface as shown below. When enabled, the
camera’s data can be protected using an authentication framework for
port-based Network Access Control (PNAC) setups. When the camera is
connected to the network with IEEE 802.1X, user authentication will be required.
To use this function, the camera shall be connected to a network switch
supporting the 802.1x protocol. The network switch can be regarded as an
authentication system that is used to find the camera in a local network. If the
camera connected to the network interface of the network switch has passed
the authentication of the switch, it can be accessed through the local network.
Protocol Type: Keep the default settings.
EAPOL Version: Keep the default settings.
Username/Password: The username and password must be the same as the
username and password that are registered in the authentication server.
5.2.7
RTSP
Go to Setup>Network>RTSP interface as shown below. The camera Real Time
Summary of Contents for DWC-MV95WiATW
Page 73: ...68 7 2 Dimensions...
