12
•
Timing: the camera will switch day/night mode following a schedule.
Shutter Mode: Choose “Auto” or “Manual”. If “Manual” is selected, the digital
shutter speed can be adjusted.
Gain Mode: Choose “Auto” or “Manual”. If “Auto” is selected, the gain value will
be automatically adjusted according to the environment. If “Manual” is selected,
the gain value shall be set manually. A higher value will result in a brighter image.
Lens Distortion Correction: If the image appears warped, enable this function
and adjust the level to correct the distortion. (available for fisheye models only)
HFR: High Frame Rate. If “ON” is selected, the maximum frame rate of the Main
stream can be set to 60 fps /50fps.
Frequency: Select either 50Hz (EU/Asia) or 60Hz (N/S America).
Infra-red Mode:
•
Auto: the camera will automatically turn IR lights ON/OFF when switching
between Day/Night modes.
•
ON: forces camera IR lights to remain ON.
•
OFF: forces camera IR lights to remain OFF.
Corridor Pattern: Corridor viewing modes can be used for situations such as
long hallways. 0 (default), 90, 180 and 270-degree options are available. The
video resolution should remain at 1080p or below if this function is used.
Image Mirror: invert the current video image horizontally.
Image Flip: invert the current video image vertically.
5.1.2
Video Configuration
Go to Setup>Camera >Video interface as shown below. In this interface, set the
resolution, frame rate, bitrate type, and video quality of the camera, depending
on network conditions.
Summary of Contents for DWC-MV95WiATW
Page 73: ...68 7 2 Dimensions...
