58
Snapshot Settings
Go to Setup>System
>
Snapshot to go to the interface as shown below.
Set the format, resolution and quality of the image saved on the SD card and the
snapshot interval and quantity and the timing snapshot here.
•
Snapshot Interval: Set the amount of time (seconds) between
snapshots.
•
Snapshot Quantity: Set the maximum quantity of snapshots that will be
taken. The actual quantity of snapshots may be less than this number.
Supposing the occurrence time of an alarm event is less than the time of
capturing pictures, the actual quantity of snapshots is less than the set
quantity of snapshots.
Timing Snapshot: Enable timing snapshot first and then set the snapshot interval
and schedule. The setup steps of the schedule are the same as the scheduled
recording (See
5.7
Maintenance Configuration
5.7.1
Backup and Restore
Go to Setup>Maintenance>Backup&Restore.
Summary of Contents for DWC-MV95WiATW
Page 73: ...68 7 2 Dimensions...