19
5.2
Network Configuration
5.2.1
IPv4 and IPv6
Go to Setup>Network>IPv4/IPv6 interface as shown below. There are two ways
to setup the network connection.
Obtain an IP address automatically: (DHCP) the camera will automatically be
assigned an IP address from a connected DHCP server or router.
Use the following IP address: Manually assign an IP address to the camera; you
must also manually assign the Subnet Mask and Gateway settings.
Test: Test the effectiveness of the IP address by clicking this button.
DNS Server: Set the address of the preferred routing server for external network
connections.
5.2.2
Port
Go to Setup>Network>Port interface as shown below. HTTP port, Data port and
RTSP port can be set.
Summary of Contents for DWC-MV95WiATW
Page 73: ...68 7 2 Dimensions...
