R e s e t t i n g t h e C a m e r a
P r e s s i n g t h e r e s e t b u t t o n o n t h e c a m e r a ’ s c o n t r o l b o a r d f o r f i v e ( 5 )
s e c o n d s w h i l e p o w e r c y c l i n g t h e c a m e r a w i l l i n i t i a l i z e a l l e n v i r o n m e n t a l
v a r i a b l e s t o f a c t o r y d e f a u l t . P r e v i o u s s e t u p f o r I P d e f a u l t , t i m e , e t c .
w i l l b e d e l e t e d .
To reset the camera to its factory default settings:
1. Turn the camera Off (unplug from PoE Switch)
2. Press and hold
the ‘Reset’ button and turn the device On
(Connect PoE cable to camera).
3. Hold the Reset button for 5 seconds while the
power is on.
4. The camera would be set to its default settings.
The following are the default network settings.
CAMERA REBOOT*
IP Mode
DHCP
IP Address
192.168.1.123
Subnet Mask
255.255.255.0
Gateway
192.168.1.23
Command Port
7000
HTTP Port
80
Live Port
7001
* Frequent use may cause system error.
2 5
R e s e t B u t t o n i n t h e M P T Z 5 X
R e s e t B u t t o n i n t h e M P T Z 5 X F M
